A Ti3C2Tx-carbon black-acrylic epoxy coating for 304SS bipolar plates with enhanced corrosion resistant and conductivity

A conducting and anticorrosive coating is crucial for the application of metal bipolar plates (BP) in proton exchange membrane fuel cell (PEMFC). In this work, a Ti₃C₂T_x (T)-carbon black (C)-acrylic epoxy (AE) coating is prepared on 304 stainless steel (SS) with enhanced corrosion resistance and conductivity. The corrosion resistance of the T-C-AE coating is investigated in a 0.5 M H₂SO₄ solution as compared to the AE, T, and T-AE coatings. The T-C-AE coated 304SS exhibits the strongest corrosion resistance with the most positive corrosion potential and the lowest corrosion current density of 0.00673 μA cm^?2 in all the samples, while retaining intact and compact surface morphology with the lowest metal ion dissolution even after immersed for 720 h. The addition of Ti₃C₂T_x and carbon black into the AE matrix greatly decreases interfacial contact resistance (ICR), and the T-C-AE coating achieves a low ICR of 15.5 mΩ cm^?2 under 140 N cm^?2 compaction force. The excellent anticorrosion performance is mainly attributed to the physical barrier and the cathodic protection provided by the stacked Ti₃C₂T_x (MXene) nanosheets in the T-C-AE coating. This eco-friendly, conducting, and anticorrosive T-C-AE coating has a good application prospect on SS BP of PEMFC.     

Ag nanoparticles-polypyrrole-carbon black/mesoporous TiO2 novel nanocomposite as ultrafast visible-light-driven photocatalyst

Effective design and fabrication of novel visible light-oriented photocatalysts is an existing challenging task that requires further dedicated efforts, and it has been always a main concern among the scientific community. This study deals with the design and fabrication of an extremely active and ultrafast ternary photocatalyst based on Ag nanoparticles, polypyrrole doped carbon black (PPy-C) and mesoporous TiO₂ (m-TiO₂). Sol-gel methodology along with sonication and photodeposition routes have been employed for the successful creation of the ternary framework. Ternary photocatalyst composed of uniform spherical titania nanoparticles (10–15 nm in size) perfectly intermingled with the polymeric linkage of PPy-C. Fruitful creation of unique trio photocatalyst between AgNPs, PPy-C and m-TiO₂ was confirmed by XPS and XRD. FTIR analysis further supports the development of nanocomposite photocatalyst. TEM analysis showed uniform spherical m-TiO₂ nanoparticles (10–15 nm in size) covered by PPy-C with compact nodes like appearance interlocked very well among each other. The newly developed Ag@PPy-C/m-TiO₂ ternary photocatalyst exhibited band gap energy in desired visible range of spectra. The photocatalytic efficiency for all created photocatalysts has been evaluated taking Imidacloprid (insecticide derivative) and methylene blue (MB) dye as target pollutants. The novel Ag@PPy-C/m-TiO₂ photocatalyst produced astonishing results with ultrafast removal of both Imidacloprid as well MB dye under visible light irradiation. The newly created ultrafast Ag@PPy-C/m-TiO₂ photocatalyst has removed 96.0% of the insecticide Imidacloprid in only 25 min with almost ? 2.65 times more efficient than bare m-TiO₂ towards the removal of insecticide derivative. The present report offers a highly encouraging and vastly talented Ag@PPy-C/m-TiO₂ ternary photocatalyst, enabling the ideal management of extremely lethal and notorious chemicals.     

Morphological description of the immature stages of Hermetia illucens (Linnaeus, 1758) (Diptera: Stratiomyidae)

In the dipteran genus Hermetia, only 6 of the 78 valid species have documented immature stages: H. albitarsis Fabricius, 1805, H. aurata Bellardi, 1859, H. concinna Williston, 1900, H. illucens (Linnaeus, 1758), H. panamensis Greene, 1940 and H. pulchra Weidemann, 1830. In particular, H. illucens stands out due to its reported applicability for forensic, medical and economic purposes. Here, we described the morphology of eggs and immature stages of this species, with a view to detecting differences between instars and in the pupal stage, which should eventually help properly identifying larval age. We utilized both optical and scanning electron microscopy tools. The eggs are elliptical and elongated, and color varies from cream white to yellowish. The larvae are apodal, hemichephalic and holopneustic, flattened dorso‐ventrally and may be recognized by the head elongated, dorsal and ventral chaetotaxy of the cephalic capsule, thoracic and abdominal segments, and the morphology of the anterior and posterior spiracles. The pupae are adecticous and coarctate, tegument dark brown and pruinescence varying from brown to golden. The overall morphology across instars is similar, but marked variations were observed in the shape of the antennal articuli and the shape of the setae (first instar compared to the others). Our results supplement the biological information on Hermetia illucens and should aid the proper identification and aging of juveniles in the field, as a way to minimize errors in the calculation of the post‐mortem interval.     

Multi-Functional Black Bioactive Glasses Prepared via Containerless Melting Process for Tumor Therapy and Tissue Regeneration

Tissue regeneration in complex lesions such as the site of tumors, bacterial infection, and sites lacking blood vessels, has been a huge challenge. Therefore, developing bioactive implantable materials with multi-functional properties such as tumor destruction, bacteria growth inhibition, and angiogenesis promotion is of great significance. In this study, black CaO-SiO₂-TiO₂ (CST) glasses are prepared through the containerless melting approach, by which heterogeneous nucleation can be avoided and thereby glass formation becomes possible via fast quenching. This approach enables the formation of trivalent titanium (Ti³⁺) without using a reducing atmosphere or reducing agents. The black CST glasses are found in this study to possess a strong ability to inhibit bacteria and tumors by their excellent photothermal and photocatalytic effects. Strikingly, these glasses also promote the formation of blood vessels and accelerate the healing of chronic wounds by the synergistic effects of the photothermal effect and Si ions. Thus, this glass system can be a promising multi-functional material for tissue regeneration in complex lesions.     

Black phosphorus junctions and their electrical and optoelectronic applications

Black phosphorus(BP),an emerging two-dimensional material,is considered a promising candidate for next-genera-tion electronic and optoelectronic devices due to in-plane anisotropy,high mobility,and direct bandgap.However,BP devices face challenges due to their limited stability,photo-response speed,and detection range.To enhance BP with powerful electric-al and optical performance,the BP heterostructures can be created.In this review,the state-of-the-art heterostructures and their electrical and optoelectronic applications based on black phosphorus are discussed.Five parts introduce the perform-ance of BP-based devices,including black phosphorus sandwich structure by hBN with better stability and higher mobility,black phosphorus homojunction by dual-gate structure for optical applications,black phosphorus heterojunction with other 2D materials for faster photo-detection,black phosphorus heterojunction integration with 3D bulk material,and BP via As-doping tunable bandgap enabling photo-detection up to 8.2 μm.Finally,we discuss the challenges and prospects for BP electric-al and optical devices and applications.     

Synthesis and evaluation of several high absorbance black pigments for spacecraft thermal control coatings

Using black coatings and materials with high light absorbance that are capable of absorbing photons at visible and longer wavelengths is a very effective way to reduce unwanted stray light, also known as optical noise, within optical equipment. These lights can be greatly reduced to a reasonable level by functional and performable black coatings that are modified to absorb incident light as much as possible by their specific pigments. In the present work, several carbonaceous pigments were synthesized for the first time from wasteful materials and their optical properties in the visible and near‐infrared ranges studied. First, MCM‐48 and SBA‐15 were synthesized at different conditions and were then used as templates for carbonaceous products. SSS‐1 (the carbonic pigment synthesized by the mixture of sucrose and sodium silicate), SSS‐2 (the carbonic pigment synthesized by the mixture of sawdust and sodium silicate), and mesoporous carbon pigments (CMK‐3 and CMK‐1 with different levels of saturations) were synthesized. Finally, their structure, morphology, and optical properties were investigated by X‐ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE‐SEM), and Diffuse Reflectance Spectroscopy (DRS). The results indicated that the SSS‐1 pigment had a lower reflectance (below 1%) than carbon black (about 2.5%) in the visible region despite it being more cost‐effective than carbon black. The mesoporous pigments showed very high light absorbance in the visible region (about 2.5%). Compared with other black pigments, the CMK‐1 was the blackest synthesized material with a very low reflectance (about 0.05% in visible region), making it an ideal candidate as a super black pigment for reducing unwanted stray light within optical equipment.     

Association of size‐fractionated indoor particulate matter and black carbon with heart rate variability in healthy elderly women in Beijing

Associations between size‐fractionated indoor particulate matter (PM) and black carbon (BC) and heart rate variability (HRV) and heart rate (HR) in elderly women remain unclear. Twenty‐nine healthy elderly women were measured for 24‐hour HRV/HR indices. Real‐time size‐fractionated indoor PM and BC were monitored on the same day and on the preceding day. Mixed‐effects models were applied to investigate the associations between pollutants and HRV/HR indices. Increases in size‐fractionated indoor PM were significantly associated with declines in power in the high‐frequency band (HF), power in the low‐frequency band (LF), and standard deviation of all NN intervals (SDNN). The largest decline in HF was 19% at 5‐minute moving average for an interquartile range (IQR) increase (24 μg/m³) in PM_0.5. The results showed that smaller particles could lead to greater reductions in HRV indices. The reported associations were modified by body mass index (BMI): Declines in HF at 5‐minute average for an IQR increase in PM_0.5 were 34.5% and 1.0% for overweight (BMI ≥25 kg/m²) and normal‐weight (BMI <25 kg/m²) participants, respectively. Moreover, negative associations between BC and HRV indices were found to be significant in overweight participants. Increases in size‐fractionated indoor PM and BC were associated with compromised cardiac autonomic function in healthy elderly women, especially overweight ones.     

酞菁蓝/蒽醌蓝研磨复配炭黑对织物印花色相的影响

将酞菁蓝颜料及蒽醌蓝与炭黑复配,以木质素磺酸钠为分散剂,用砂磨法制备纯黑色相炭黑色浆。结果显示,研磨1 h后粒径在108 nm左右,炭黑分布较窄,PDI为0. 083 9;SEM测试显示分散体颗粒大小分布均匀,分散性良好;该水性炭黑色浆体系稳定性较好。随着体系蓝色用量增加2. 5%,色浆a^*、b^*值均趋近于0,接近于纯黑色相。     

不同水分工夫红茶贮藏过程中主要内含成分及感官品质变化研究

目的研究不同水分工夫红茶贮藏品质变化规律,为工夫红茶贮藏的适宜水分条件提供理论参考。方法系统比较不同水分工夫红茶(国家标准范围内)在自然贮藏条件下其主要内含成分及感官品质的变化。结果 1年贮藏期内,初始水分含量越低,含水率增长速度越快,总体上,茶叶初始水分含量高低决定贮藏过程中水分的高低。在短期贮藏(≤6月)时含水量越高的红茶中茶多酚、水浸出物保留量越多;长期贮藏(6月)时水分较低的红茶中茶多酚、水浸出物保留量越多。咖啡碱、可溶性糖在短期贮藏(≤6月)中水分含量适中的红茶中下降速度越慢;长期贮藏(6月)含水量较高的保留量越高。氨基酸含量在含水量越低的红茶中越高。初始水分含量高的红茶L*、a*、b*值均稍高于水分低的红茶。结论从综合品质的变化来看,本实验中以处理3含水率为5.93%的处理最好,处理2含水率为4.1%次之,处理1含水率为2.33%最差。     

Combination of freeze drying and molecular inclusion techniques improves the bioaccessibility of microencapsulated anthocyanins from black rice (Oryza sativa L.) and lavender (Lavandula angustifolia L.) essential oils in a model food system

Black rice and lavender are promising sources of bioactives, in terms of anthocyanins and essential oils. Their bioaccessibility were improved by microencapsulation, followed by mixing in order to benefit both from colour and flavour, along with radical scavenging and biological properties. The mixed powder showed a satisfactory anthocyanins of 2.55 mg g⁻¹ DW, leading to a radical scavenging activity of 65.14 mmol g⁻¹ DW. The powder displayed an inhibitory effect against α-glucosidase (~49%) and α-amylase (39%), respectively, with a controlled release in intestinal environment. To further examine the functional properties, the powder was added to a food model system. During storage, a release in anthocyanins and flavonoids were found, leading to an increase in radical scavenging activity. The sensorial analysis showed that supplemented biscuits were appreciated for colour and lavender aroma. The obtained results were promising in tailoring the health benefits of secondary metabolites, underutilised in human’s nutrition due to their low stability and bioavailability.